Page 49 - Unistrut Cable Management & Metal Framing
P. 49

 Concrete Inserts
Support Systems
                Concrete Inserts
Unistrut concrete inserts are manufactured from the standard Unistrut channel and may be installed in floors, walls, or ceilings
for the support of all types of piping, conduit, cable support, and other industrial equipment.
Unistrut channel nuts can be positioned anywhere along the length of the channel, providing a means of attaching fittings or rods
where required.
Unistrut inserts are available pre-filled with an easily removable foam to prevent the ingress of grout and cement. Concrete inserts can be supplied in pre galvanized, hot dip galvanized and stainless steel finishes.
   L= 6 m
100 mm 100 mm
41 21
2,5
                  A 59
21
                   P3370
PG
HG
SS
 L= 6 m
100 mm
100 mm
41 21
                 2,5
              A
79
41
                      P3270
PG
HG
SS
 P3270 inserts are designed to accommodate M6, M8, M10, M12 & M16 fixings. Cutting positions are located between lugs as indicated (A) in increments of 200mm.
The recommended loading in average strength concrete* with a safety factor of 3, is:
*B = 25 N/mm2
Stated loadings apply to mild steel products only.
P3370 inserts are designed to accommodate M6, M8, M10 & M12 fixings. Cutting positions are located between lugs as indicated (A) in increments of 200mm
The recommended loading in average strength concrete* with a safety factor of 3, is:
*B = 25 N/mm2
  Part No. Pullout Length P3370 6.7kN 300mm
 Part No. Pullout Length P3270 8.8kN 300mm
 www.unistrut.co.uk
+44 (0) 121 580 6300 49
          Metal Framing

























































   47   48   49   50   51